0
$\begingroup$

I've been attempting to plot the following function using MATLAB: $$ x(k)=\sum_{n=11}^{50} \sqrt{n} \sin (2n\pi k) +\sum_{n=1}^{40}\sqrt[3]{n} \sin (3n\pi k) $$

Note that $k$ is a continuous variable.

The problem I am facing with MATLAB is when I plot it, I get a signal which has a fundamental period of 2 seconds, and not 1.5 seconds.

Have a look below: Plot using MATLAB plot function

I've tried a higher sampling rate: At a higher sampling rate

So, what is going on wrong? Why isn't the fundamental period 1.5Hz?

Improve this question
$\endgroup$
3
  • $\begingroup$ Assuming your horizontal axis is in seconds, you have 3 full cycles in 2 seconds, which gives a fundamental period of 3/2 Hz = 1.5 Hz, as you were expecting. $\endgroup$
    – Jazzmaniac
    Commented Mar 12, 2016 at 23:34
  • $\begingroup$ @MattL. Thanks, Matt, but $x(k)$ is defined as a continuous periodic function. You could replace k by t. $\endgroup$
    – Theo
    Commented Mar 13, 2016 at 6:37
  • $\begingroup$ @ Jazzmaniac Thanks for pointing that out, but... how do you identify the three cycles visually? I can't see them, or see a form of $x(n+N)$ which implies periodicity. $\endgroup$
    – Theo
    Commented Mar 13, 2016 at 6:38

1 Answer 1

Reset to default
0
$\begingroup$

With $k$ a continuous variable, the frequencies of the sinusoids in the first sum are $f_n=n$, i.e. they are integers. The frequencies in the second sum are integer multiples of $\frac32$. The highest fundamental frequency of which all those frequencies are integer multiples is $f_0=\frac12$. The frequencies in the first sum are given by $2mf_0$ (with integer $m$), and the frequencies in the second sum are $3mf_0$. With a fundamental frequency of $f_0=\frac12$, the fundamental period is $T=2$, as observed by you.

Improve this answer
$\endgroup$
4
  • $\begingroup$ Thanks a lot, Matt! That solved it. But could you explain how did you analytically calculate it? $\endgroup$
    – Theo
    Commented Mar 13, 2016 at 12:38
  • $\begingroup$ @Zushauque: Well, the frequencies in your signal are given, and you just need to find a fundamental frequency such that all frequencies in the signal can be represented as integer multiples of that fundamental frequency. $\endgroup$
    – Matt L.
    Commented Mar 13, 2016 at 18:27
  • $\begingroup$ Oh, did that. Thanks for telling me about that. By the way, is there is a systematic way in which I would calculate the fundamental frequency from the arguments of a series of the terms? I saw something about Greatest Common Divisor and Least Common Multiple, 1/2 is the LCM for this example, but it isn't really an integer which is kinda odd for the LCM? $\endgroup$
    – Theo
    Commented Mar 15, 2016 at 19:25
  • $\begingroup$ @Zushauque: It's more like a GCD. Have a look at this site. $\endgroup$
    – Matt L.
    Commented Mar 15, 2016 at 19:43

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.