I'm trying to understand how to make Sample rate change by a non integer factor say K=1.0012
In real hardware I will be using cubic polynomial but for now I have chosen a linear interpolator. I have calculated the Lagrange coefficients:
[![Linear interpolator, Farrow implementation][1]][1] 


  [1]: https://i.sstatic.net/QLaAv.png

Let's simplify my case and assume that K=4/3
So Kinv = 1/K = 0.75

I cannot fugure out the condition when the new sample should be generated.
As you can see in my picture the **mu** range is **[-1:0]**. So my guess is that as long as mu is in the range we use the input data valid, when mu is out of range - we must generate the new data valid?

**mu** must be computed like this: mu(n) = mu(n-1) + Kinv + ?

So my questions are

1)Is that correct assumption?

2)How to keep **mu** in range [-1:0]?

3)mu(0) = 0 or Kinv?

Thanks