Questions tagged [peak-detection]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
0answers
20 views

Matched filter correct peak detection [duplicate]

I am working with ultrasound signals with frequency 100 kHz. Chirp signals with bandwidth 16 kHz are being modulated with 100 kHz and then transmitted via one ultrasonic sensor. With another ...
0
votes
0answers
46 views

How to obtain exponential decay peaks from damped signal in python? [closed]

I have a signal where I would like to implement a peak detection algorithm where it only collects peaks that follow exponential decay behaviour and stop at a certain height. Here is an example of a ...
0
votes
0answers
23 views

Filtering out symmetric noise from an oscilloscope reading

I have a signal that looks like this: The data is readings from two oscilloscope channels, one color coded blue, the other color coded orange. I would like to filter out the supply noise (all the ...
1
vote
0answers
19 views

Noise level estimation using Hildebrand & Sekhon method

I have some data from a radar to process in order to find the moments and in turn the wind speeds. I have no prior knowledge in signal processing so it's giving me a hard time to estimate the noise ...
0
votes
0answers
16 views

Extracting time-tagged pulses from Geiger audio recording

I am doing some tests with SmartGeiger detector designed for smartphones. The sensor unit sends pulses via phone microphone jack input and the app does the counting and calculates the values. However,...
0
votes
1answer
47 views

How to find correlation between two signals regarding peaks?

In a super-resolution task, I try to predict the higher frequencies of a signal. X low-resolution (lr) is my input and Y high-resolution (hr) is the target. Where X contains only frequencies till 2 ...
0
votes
0answers
23 views

How to find phase of two fixed Gaussian of periodical signal (analytically)?

For a periodical signal define on $\phi \in [0, \pi * 2)$, there was supposed to be two peaks, may following Gaussian, but may also be Cauchy or other distribution with one peak, plus Poisson noise. ...
0
votes
1answer
30 views

Detecting peak value on realtime IMU data stream

I'm using Qt C++, QCustomPlot to read and display realtime value from an IMU. This is how I set the realtimeDataSlot: ...
0
votes
3answers
133 views

How do you do signal averaging on a realtime data?

Smoothing algorithms implemented by me Exponential smoothing - https://www.openprocessing.org/sketch/771368 Moving Mean - https://www.openprocessing.org/sketch/540696 For example - a1+a2+a3+a4+... ...
1
vote
5answers
148 views

How to detect overlapping peaks in FFT?

I am working with a modular spectral processing STFT toolkit I have written in C. I often need to carry spectral peak detection and analisys (frequency estimation, peak displacement, etc) but I am ...
0
votes
1answer
53 views

How to measure algorithmically side lobes in real data

I want to measure algorithmically the following parameters in a given FFT data (real numbers). peak side lobe levels side lobe levels 
side lobes nulls The following image illustrates parameters I ...
0
votes
2answers
115 views

Envelope reconstruction algorithm for audio processing

I need to reconstruct the envelope of a sound. Audio data are professionally-recorded natural sounds (speech, bird songs) with very little noise. I would prefer working in the time domain rather ...
0
votes
0answers
38 views

Detect Trigger in vibrational data

I'm trying to classify states with a 1D-CNN-Network structure. Therefore I need to analyze the incoming vibrational data in a certain window. Two examples of such signals are shown below. I'm ...
0
votes
0answers
46 views

peak detection for stock data?

I am looking for some suggestions on what techniques to use for stock data. Specifically i am looking for some methods to both de-noise data, and then find ways to transform the smoother data into a ...
0
votes
2answers
1k views

How would you use machine learning for peak detection?

I have a noisy signal and I'm trying to find a way to detect peaks with ML. The "peaks" are easy to find as human because they are rhythmic and have the same "general" shape but the amplitude and ...
1
vote
0answers
79 views

Robust peak detection taylored for spectroscopy

i need a algorithm for peak detection in raman spectroscopy. I tried this one, but it did not give me satisfying results. Spectrums may look like this: In professional software, i think they use the ...
1
vote
2answers
92 views

Filtering Surge Signals

I am working on a matlab program which needs me to detect the pattern of surges in a signal and then remove them. I tried out various filters like median, hampel, butterworth etc. but couldn't get an ...
0
votes
0answers
46 views

What exactly does up triangle \land symbol mean in the context of peak detection?

Folks, I'm reading this paper: User Adaptive QRS Detection Based on One Target Clustering and Correlation Coefficient, and have a question about notation. In describing peak-detection, they use the ...
1
vote
1answer
65 views

Intelligent Noise Removal in Data

This question is linked to this question: I have this data: ...
0
votes
1answer
260 views

Time delay estimation between two complex signals(IQ)

I need to time align two complex signals. The two signals obtained were at different RF frequency before digitisation. So,I have two complex signals(IQ) and I need to do delay estimation and apply ...
1
vote
0answers
89 views

Extracting signal from data using Otsu thresholding in MATLAB?

I am very new to signal processing. I am trying to extract a signal from my data using otsu threholding but it's not fully accurate. In this case I know that there is going to be a single signal in ...
1
vote
1answer
289 views

Filtering and peak finding

I have an observed signal which is the norm of the sum of two 3-vectors: $$ S(t) = || \mathbf{A}(t) + \mathbf{B}(t) || $$ Now, I have full knowledge of the vector $\mathbf{A}(t)$, $$ \mathbf{A}(t) = \...
0
votes
2answers
417 views

Detection of sharp peaks in an audio signal

I have an audio signal and I'm interested to detect the very sharp peaks. If I zoom, here is something that should NOT be detected (this is voice actually): NO GOOD Here is something that should be ...
0
votes
0answers
44 views

Peak Analysis vs Machine Learning

I am unsure about which approach is "better" (less time good accuracy) for classifying gestures: The system is a doppler radar that returns I and Q signals Approach 1: Have several subject perform ...
0
votes
2answers
259 views

Threshold for peak detection of noisy signal in frequency domain

I have a noisy signal (Gaussian Noise) with a known SNR and known Noise variance. This signal contains a number of Frequency components. My ultimate objective is to detect the components of the signal....
3
votes
4answers
289 views

Estimate peak width from a vector that is a superposition of unknown number of identical Gaussian peaks with different heights?

If you have a vector that is a superposition of an unknown number of identical Gaussian shaped peaks/impulses of unknown width (but all the same width) and different amplitudes (with Poisson or ...
3
votes
1answer
123 views

Chromatogram peak detection - bunching vs others?

Reading presentations from existing tool providers I noticed that in order to detect peaks they first use bunching (average N points) and then use slope and curvature to detect peaks. I'm guessing ...
0
votes
1answer
45 views

How to differentiate an empty aerosol from a full one using only sound measurements?

The challenge I have is to detect an empty spray container using sound measurements only, since I can't place any sensor directly into the container because of the mechanism that tightens it. My main ...
0
votes
1answer
2k views

Checking for VHF pulse with SDR and python

So I have a small NooElec Software Defined Radio and I've got it working well with my Raspberry Pi using GQRX as a controller and to visualize the SDR output. My goal though is to use a python script ...
0
votes
1answer
180 views

Peak Detection Of Every Pulse

I have this signal as the following figure: Now, I need to know each beginning index of each pulse as described in the following figure: I have tried to detect the peaks through obtaining the cross ...
0
votes
2answers
73 views

What should I do with FFT result array from microphone input? [duplicate]

I currently want to create a small pitch detector and I have to say that I am very new in this topic of signal processing. At the moment I implemented the FFt algorithm and I got an array of window ...
0
votes
2answers
170 views

Pitch detection of two following music notes (C0 and C0#)

Hi signal processing community, currently I am working on a pitch detection tool which should work on audio input files (or later also instrumental or voice from microphone) to say which music note ...
0
votes
1answer
440 views

How to get coordinates of complex RTL-SDR signal?

As I have already explained here (https://stackoverflow.com/questions/49358449/python-how-to-get-coordinates-of-complex-rtl-sdr-signal-peaks?noredirect=1#comment85722604_49358449), I need to find the ...
0
votes
2answers
635 views

Curved noise floor and ugly unexplained peaks after FFT

It has been so long since I studied this at University, so I'll better ask here if I'm doing something really wrong here. I'm using a USRP frontend for L1 band surveillance. I want a 20MHz bandwidth, ...
0
votes
3answers
315 views

Extract breaths from respiratory signal, i.e. peak detection

I am trying to extract breaths from a respiratory signal, which is essentially peak detection. See the example below for what such a signal looks like. This particular signal looks rather clean, ...
1
vote
1answer
555 views

Harmonic Product Spectrum algorithm. I dont understand one step

I was looking some Harmonic Product Spectrum algorithm examples and I came up with this: ...
0
votes
1answer
968 views

Name of peak finding algorithm

I've been using this implementation of a peak finding algorithm and it works pretty well. I'm wondering if this particular algorithm has a name? Python code: ...
2
votes
1answer
38 views

What does this block operator mean?

What does this block do? It's part of a block diagram for a RMS/Peak detector.
6
votes
1answer
9k views

Taking audio frequency and picking out peaks (Peak Detection)

So I have a unique challenge. I want to take an audio file, and pick out the peaks in the samples and plot that onto a graph. Each point based on the amplitude/pitch(?) will be represented as either a ...
1
vote
1answer
2k views

How do spectrum analyzers detect peaks?

Using peak search, I'm able to put the cursor on any of the several peaks on the spectrum analyzer display. I am trying to do something similar in software, with the output of the FFT of the radio ...
2
votes
1answer
212 views

How to detect peaks ignoring soft declivity?

I have to detect repetitions in a signal, and I am managing to do it by finding peaks and valleys, and cutting the desired pieces. The following figure shows the pattern wanted, shaded areas are the ...
1
vote
0answers
208 views

Cross Correlation shows peak at the same location every time

I have a signal which is taken from an accelerometer and I'm trying to match patterns between different windows of the signal by cross correlation. To do this I take different windows of the signal, ...
1
vote
1answer
236 views

How can I get the uncertainties for peaks on an image?

When pick the peak points on an image, e.g. the matrix made by peak in matlab as this one, I can use max to get the index of ...
2
votes
1answer
288 views

Unexpected peaks in spectral analysis

I am doing the spectral analysis of some antenna recorded signals by computing PSD (logarithmic absolute value of the FFT) and the spectrogram of the signal. The problem is that I get some unexpected ...
2
votes
0answers
125 views

Peak detection for signals that contain high frequencies

I have an question about peak detection. My purpose is creating a plot with an impulse response and the decay line at / above it. What I see till now is that there are two options for finding peaks: ...
1
vote
1answer
136 views

Detecting expected patterns in repeated measurements

I am new to signal processing and I am trying to learn myself. To understand what i am interested in, let me show this on example (note that this is just a random example to illustrate). Here is some ...
0
votes
1answer
599 views

Periodicity of peaks within a signal

I have a signal, in which i want to detect the period of the peaks, that exist within this signal: for example : After each 5mm or (5 seconds depending on the sampling rate and speed of my motor) i ...
2
votes
0answers
152 views

how to detect number of syllables in a batch of audio recordings?

I have a corpus of short speech samples from Kiswahili speakers, and I want to detect the number of syllables in each audio recording. How should I approach this task? Background: I asked a ...
1
vote
1answer
1k views

DFT normalization for amplitude estimation

After an interesting recent answer, I'm doing some research on proper DFT normalization for sinusoidal peak estimation. It's clear that to get the correct amplitude from DFT peaks we need to normalize ...
1
vote
2answers
981 views

Getting a more accurate frequency read from autocorrelation and peak-detection algorithm

For a project I am attempting to create an automatic tuner for a guitar, which reads the audio from the guitar jack, determines the frequency and adjusts the string by a motor. Using http://www....