# Questions tagged [nyquist]

The tag has no usage guidance.

155 questions
1answer
64 views

### Sub nyquist sampling, required number of samples for time sparse grouped signals

Question: Does it make sense to perform compressed sampling if the non zero samples are grouped in time? If so, what is the minimal length of the vector x that should be acquired to allow full signal ...
0answers
28 views

0answers
46 views

### Proving Nyquist Sampling theorem for strictly bandlimited signals

I understand that the Nyquist sampling theorem dictates that the minimum sampling frequency, $f_s$, be s.t. $f_s > 2B$, where $B$, is the bandwidth of the signal. I have read the explanation for ...
1answer
60 views

### Effective Nyquist frequency / signal resolution for overlapping time averaged signal samples

Say that I have a continuous signal. If I sample the signal at sampling rate f_sample, then the highest signal frequency that I can resolve without worrying about ...
1answer
40 views

### Number of discrete samples required for the longest wavelength

I am trying to understand the effect of the critical Nyquist frequency when applying the Goertzel algorithm for estimating the power spectrum of a discrete signal. (Goertzel doesn't really matter, ...
1answer
26 views

### Frequency spectra of a sampled process

I have a process $X$ with frequency spectra I sample this process with sampling frequency $f_s = 2$. What will the frequency spectra $R_z(f)$ of the sampled process $Z$ look like? I realize that ...
2answers
133 views

### Higher order harmonics during sampling

I am studying about the sampling theorem in conjunction for ADC. I got little confused while reading about aliased frequencies. I see that as per the Nyquist theorem, the sampling frequency (fs) ...
1answer
82 views

### Is it possible to lose half the samples, and yet see the full spectrogram as the original signal?

Consider an speech audio signal sampled at 16,000 samples per second. Plot its spctrogram. If we delete every other sample from input signal, we get y[n] = x[2n] for all n. It seems that if we plot ...
1answer
68 views

### Follow up question regarding: “Complex sampling can break Nyquist?”

I'm having some trouble understanding the sample rate limitations when considering a complex baseband signal. I understand (based on the linked SE questions below), the either (1) physically ...
1answer
145 views

### Minimum Channel Bandwidth for PCM

Please check if my answer to GATE IN 2010 question 11.20 is correct/can be improved upon. So, every $\frac{1}{f_s}$ sec, a sample is taken. The signal amplitude is quantized into $2^n$ levels such ...
1answer
586 views

### Passband vs Baseband Bandwidth

Bandwidth is the difference between the upper and lower frequencies in a continuous band of frequencies. A key characteristic of bandwidth is that any band of a given width can carry the same ...
1answer
40 views

2answers
69 views

### Is it possible to discretely sample the function

I had a few questions on sampling(I'm quite new witht his), I tried to answer them, I think that I did the first one correct , but not sure about the 2 other: . given the next functions,Is it possible ...
2answers
203 views

### Invertibility of Room Impulse Response: Reproducing Research Paper

I have been trying to reproduce this paper¹. Few things which are unclear to me. The paper talks about finding whether a given Room Impulse Response(RIR) is invertible or not based on Nyquist plot. ...
1answer
236 views

### Fractional Delay Filters and Cutoff Frequences

I am trying to implement an interpolator for arbitrary sampling rate conversion of a one-dimensional signal (a fractional delay filter). I am aware of the fact that interpolation is in general a ...
5answers
877 views

### Confusion regarding Nyquist Sampling Theorem

The first time Nyquist Theorem was mentioned in class. It stated that we should sample at twice the highest frequency content of the signal. Example: If we wanted to sample $\cos(2 \pi f_0 t)$, the ...
1answer
624 views

### A voice signal is band-limited to 3.3 kHz. What is the Nyquist frequency?

I'm having a some trouble with an assignment I have to do. I don't come from electrical engineering background and would appreciate any help I can get. "A voice signal is band-limited to 3.3 kHz. ...
6answers
25k views

### If humans can only hear up to 20 kHz frequency sound, why is music audio sampled at 44.1 kHz?

I read in some places that music is mostly sampled at 44.1 kHz whereas we can only hear up to 20 kHz. Why is it?
2answers
86 views

### How do ADC/DACs deal with out of sync signals near Nyquist frequency?

Let's say a converter is sampling continuously at 48 kHz and the incoming waveform is a sine wave at 24 kHz... How does it faithfully recreate the waveform if the samples are taken at points that are ...
2answers
2k views

### Root raised cosine pulse shaping filter

What are disadvantages of root raised cosine pulse shaping filter in digital communications and why does it need to be improved? Links: Square Root Raised Cosine Fractionally Delaying Nyquist ...
2answers
79 views

### Understanding the conditions for recovering a discrete time signal through sampling

So, we had a very brief introduction to the Nyquist-Shannon sampling theorem (the discrete time version). While discussing this, we have seen that multiplying a discrete time signal $x[n]$ by an ...
1answer
71 views

### Distortion of a signal consisting of two periodic components

We have a signal $$x(t)=U_1\cos\omega_1t+U_2\cos\omega_2t$$ whose frequencies are $f_1=100\,\text{Hz}$ and $f_2=600\,\text{Hz}$. This signal is being discretisated in time using unipolar ...
2answers
252 views

### compensation for irregular timestep for FFT

I want to run a clustering algorithm (svm, knn) on the ferquency spectrum data of a temperature sensor that published at irregular times. Here is the temperature data to take the FFT: I got the ...
1answer
3k views

### Nyquist criterion for zero isi

I am working with the Nyquist criterion for zero ISI when I find something that makes me think that I misunderstood this criterion. What Nyquist says is that to avoid ISI in the sampling we must ...
2answers
67 views

### How to classify filters?

In class, we have defined four types of filters: low-pass, high-pass, band-pass and band-stop. I have understood that in order to classify a filter into one of the fourth, one can use the signals: DC:...