Questions tagged [impulse-response]

The impulse response of a dynamic system is its output when presented with a brief input signal, called an impulse.

Filter by
Sorted by
Tagged with
5
votes
3answers
2k views

Estimating the Impulse Response of the Room Using Sweep Signal Microphone Recorded Signal (Input & Output of a Convolution)

I played this signal A (a 20Hz to 20000Hz sinusoidal sweep in 10 seconds) with a studio monitor speaker in a big church, and I recorded the result B with good microphones. The result is very reverb-...
0
votes
1answer
53 views

why is it so hard to simulate up and down position on headphones?

i'm wondering how come simulating front,back,left and right source position on headphones is easy but up and down is not ? (maybe even impossible ?) is it due to the shape of the ear ? but should we ...
2
votes
1answer
162 views

Impulse response of a transfer function

Lets say we have a transfer function from an LTI-system that goes as follows, and we want the impulse response for it: $$\frac{10\cdot e^{\left(-\mathrm{i}\right)\cdot \pi\cdot f\cdot 8}}{5+\mathrm{i}\...
3
votes
3answers
103 views

How is $\delta(at+b)=\frac{1}{|a|}\delta(t+b/a)$?

This result has been used in the second last line of the pic. I don't know why it's true. Both functions are zero for $t$ not equal to $-b/a$. But at $t=-b/a$, a scaling factor $1/|a|$ has been ...
0
votes
1answer
32 views

replace input signal with δ will have the impulse response of the function?

Is my impulse response right? By definition,the impulse response is the output when the input is a impulse signal,so $y[n]=\sum\limits ^{n}_{k=-\infty}\frac{1}{2^{n-k}}\ x[k]$,the impulse response ...
0
votes
0answers
57 views

Phase response of an LTI-system

I've got an LTI-system such as follows: $$y'(t)+{2} y(t)={5} x(t-{3}), t>0, \\ \\ y(0)=0 \ \text{ ja } x(t)=0, \ t<0.$$ From this i've already figured out the transfer function: $$H(f)=\frac{5\...
5
votes
3answers
2k views

How do impulse response guitar amp simulators work?

I am wondering how impulse response guitar amp simulators/modelers work. I thought it was a matter of convolving a signal of recorded impulse response in time-space with a guitar sample. I tried to ...
0
votes
0answers
40 views

FFT frequency-magnitude not correct when a positive gain EQ point is applied

I have a measurement system, which applies a log sine sweep as stimulus to a DUT and records the return signal. I then extract the impulse response, and perform an FFT on this to examing phase and ...
-1
votes
1answer
36 views

What exactly is stored in the buffer array in the code below? Is it the values of x[n-k] or something else?

What exactly is stored in the buffer array in the FIR Filter code below? Is it the values of x[n-k] or something else? ...
0
votes
1answer
681 views

How to prove that this impulse response is stable?

This is the impulse response: Can anyone give a detailed method to prove that it is stable or not ?
0
votes
1answer
48 views

A signal $g(t)$ is passed through a squaring device and then through an LPF such that bandwidth of the LPF tends to 0

I am solving a question, where a signal g(t) is passed through a squaring device and then through an LPF such that bandwidth of the LPF tends to 0. I understand that since for this filter the ...
0
votes
1answer
81 views

Finding the impulse response of a system

I have the following transfer function. $$ H(j\omega) = \frac{1+0.5 e^{-j\omega}}{1-1.8 \cos(\frac{\pi}{16}) e^{-j\omega}+0.81 e^{-j2\omega}}$$ I'm trying to find the impulse response of the system. ...
0
votes
1answer
86 views

Find the length of the impulse response of a Linear Phase Type 4 FIR filter

The length should be found such that the group delay is minimum It is given that the impulse response is real. One zero of the Transfer function is at $0.6e^{j\frac{\pi}{4}}$, and another one is at -...
0
votes
2answers
315 views

Why does knowing the impulse response allow you to determine the output for any LTI system?

Going over some notes on LTI systems and I’m quite confused about how knowing the impulse response of a system allows us to recover the systems’ response to any signal. In the textbook screenshot ...
1
vote
1answer
329 views

How does minimum-latency partitioned convolution reverb work when you receive input samples in chunks, rather than one at a time?

I'm writing a reverb system where I receive an input block of samples 480 elements long, do some operation on them, and pass the block on to the next effect. I've been reading up on partitioned ...
-1
votes
2answers
228 views

How to get the inverse of Filter based on channel

Given a signal $X$, and a channel $h$, and the received signal $Y = Filter(h,1,X);$ What's the inverse of filter, it means if I know $h$, how can I get back $X$ ?
0
votes
1answer
565 views

Convolution between two vectors. Length and normalization

I have an RIR vector $h[n]$ with $N$ samples and an audio source $x[n]$ with $M$ samples. I wish to simulate a 5 seconds audio segment with $x[n]$ randomly located within (timewise). Using MATLABs <...
1
vote
1answer
119 views

Difference between the two forms of input-output relationships of an LTI system

$$y(t)=f(t)*h(t)\tag{1}$$ $$y(t)=H(s)e^{st}\tag{2}$$ $$H(s)=\int_{-\infty}^{\infty}h(t)e^{-st}dt\tag{3}$$ Let $f(t)$ in Eqn $(1)$ be $e^{st}$. In many worked out examples, I have found that the two ...
2
votes
1answer
387 views

Finding impulse response of an RC circuit from its step response [duplicate]

I have to find the impulse response of an RC circuit (c up ). I have to find it from the step response $g(t)$. I found that $V_i - V_c - V_r = 0$ , with $V_r = V_u$ So $V_u = V_r = R I_r$ , with ...
1
vote
2answers
285 views

Help regarding property of unit impulse function

We know that using properties of unit impulse function it can be shown that $$\int_{t_1}^{t_2} x(t) \delta^{(n)}(t-t_0) dt=(-1)^nx^{(n)}(t_0),\quad t_1<t_0<t_2$$ (source: Continuous and ...
0
votes
1answer
25 views

Arbitrary shaped RIR generator

I wish to simulate some sound sources convolved with a Room Impulse Response (RIR) and impinging on a spherical microphone array. I could find a couple of generators online (such as this one), though ...
2
votes
1answer
7k views

How to calculate the impulse response of an RC circuit using time-domain method

I have an $RC$ circuit and I calculate the differential equation as $$RC \frac{dV_c}{ dt} + V_c = V_g$$ that is the same of $$RCy'(t) + y(t) = x'(t).$$ If I assume $x(t) = u(t)$ I have that the ...
1
vote
1answer
85 views

Impulse Response Function-Green's Function

Assuming a input-output system $$u(t) = c \cdot \big(h(t)\circledast m(t) \big)$$ where its impulse response function is: $$ h(t) = \begin{cases} \frac{A}{\tau}te^{-\frac{t}{\tau}}, &...
4
votes
3answers
659 views

Recover Filter Coefficients from Filtered Noise

I have a digital signal which may be represented as a pulse noise source filtered with an FIR (finite impulse response) filter. Suppose that the noise consists of discrete pulses (nonzero samples ...
0
votes
1answer
75 views

Computing response of LTI system in terms of its step response

I have solved a problem, Kindly help me in determing if I solved it correctly. I will post the question and my own working below. Problem My working
0
votes
1answer
727 views

pole/zero plot & impulse response

in a mock exam of dsp was asked this question, and even in knowing how to compute DFT's of the plot, I wondered if there was a fast way of pairing these plots to their respective impulse response? ...
2
votes
1answer
59 views

Missing delay in heavyside step function

I found the following task that was inspired by an example in the book A. V. Oppenheim and R. W. Schafer, "Discrete-Time Signal Processing", 3rd Edition, 2014. Task: Consider the 2nd-order IIR ...
4
votes
1answer
4k views

Estimate the Filter Coefficients of 1D Filtration (Convolution)

I have an output signal $y$ which is an input signal $x$ convolved $\star$ with an impulse response function $h$ with some added noise $n$ : $$y(t) = h(t) \star x(t) + n(t)$$ I know the input signal ...
0
votes
2answers
215 views

My impulse response does not tend to zero

I am doing an IFFT of frequency response data achieved with Simulation tools. When I plot my impulse response it looks wrong as the response does not tend to zero as it should. Instead there seems ...
1
vote
0answers
38 views

Simple Impulse Response DSP Hardware

I developed some complex chains of filters and crossovers. After that I have created IRs from the entire chains. Applying these IRs in software works perfectly. Now I wonder what is the easiest (and ...
1
vote
1answer
58 views

Discrete Time Fourier Analysis

Suppose we're given the following: $ x[n] = 2 + (-1)^n $, and are given the impulse response $ h[n] = u[n] a^n $, of an LTI system where $ |a| < 1$. We're asked to find the output $y[n]$, if $x[n]$...
3
votes
3answers
786 views

Impulse response with sweep from measurement

Does someone have a matlab script to get the impulse response from the recorded measurements using log sweep? I have the input file (sweep) and the output and I need to get the impulse response and ...
0
votes
1answer
950 views

How to determine the filter type based on the impulse response?

When given a discrete impulse response, let us say it is from an FIR filter so it is finite, how can I assume the filter type? The task is to recognize or to preclude one or more of the following ...
0
votes
1answer
4k views

What will the impulse response of a matched filter look like if the input is complex?

If $h(t)$ is the impulse response of a filter matched to a signal $s(t)$, I read that $h(t) = ks(t_o - t)$. But what if the signal is complex? I went through the derivation of the matched filter and ...
0
votes
1answer
87 views

Self study question about Padé Approximation and transfer functions

Given a signal $x[n] = [1, 2, 3, 4, 5]$. How many transfer functions can be found with Padé approximation which have a causal impulse response and start with those five samples. How many of them are ...
2
votes
1answer
293 views

Numerical Calculation of impulse response out of frequency response

Currently I work on my Masterthesis which deals with structural dynamic simulation. As a part of it I have to filter a Signal with a FIR-Filter. From that Filter I know the Frequency Response (picture)...
0
votes
1answer
62 views

Proof of $E[y(n)]=E[x(n)] \, \sum h(k)$

If $h(n)$ is the impulse response of the discrete LTI system, $x(n)$ is the white noise process with variance $\sigma_x^2$ and $y(n)$ is the output, prove that $$\mu_y = \mu_x \, \sum_{k=0}^\...
0
votes
1answer
174 views

How to find the impulse response of filter that outputs the autocorrelation of the input?

I am trying to solve question 9.61 in the attached image. I guess, by evaluating the autocorrelation for a specific instance, say $ t = 0 $ , that the impulse response, $h(t)$, should be : $$ h (t)...
7
votes
7answers
819 views

Intuition behind commutativity of convolution in LTI systems

Why is convolution commutative, as it seems to treat two signals in a different way in an LTI system? If you imagine $y[n] = x[n] \star h[n]$ with $x[n]$ being an input signal and $h[n]$ being the ...
-1
votes
2answers
137 views

How does an LTI system produce multiple values from a unit impulse

I understand that in a discreet system, an impulse is 1 at the origin point and 0 everywhere else. I've seen many examples showing the impulse response of an LTI system to be many points, have many ...
2
votes
2answers
112 views

What Is the Derivative of the Function $ s \left( t \right) = \left( 1 - {e}^{\frac{-t}{RC}} \right) u \left( t \right) $?

What is the derivative of the following function $$ s \left( t \right) = \left( 1 - {e}^{\frac{-t}{RC}} \right) u \left( t \right) $$ with respect to $t$, where $u(t)$ is a unit step ...
1
vote
1answer
505 views

Calculating an output of a system (Z- transform question)

I have a following question to answer: An LTI system is described by its impulse response h[n]. For input x[n] it gives output y[n]. $$h[n] = u(n) - u(n-N) $$ $$x[n] = u(n) - u(n-M)$$ I want to ...
1
vote
1answer
5k views

Difference between step,ramp and Impulse response

As, we can determine the response of the system by its 'impulse response' then why we use 'step response' and 'ramp response'. Is there any difference between all these response?
-1
votes
1answer
220 views

Impulse response resampling : IIR aproximation vs windowing

I have a long measured impulse response and I wand to shorten it. I imagined two options. The first is a simple windowing. The second is to model it as an IIR (prony, yulewalker, stmcb method) before ...
2
votes
1answer
744 views

Are there DC removal techniques that do not introduce a filtering transient?

I have an application in which I need to remove DC components from a sampled signal in real time (basically the same constraints of ECG, but it has nothing to do with the brain). My measured signal in ...
1
vote
1answer
697 views

How to represent impulse function in 2D?

To be more specific I want to show that impulse function in 2D can be represented as $β(r)=δ(r)/πr$. Also I want to show that each projection of a two dimensional impulse function at the origin is a ...
1
vote
1answer
150 views

Simple Impulse Response

I am trying to find the impulse response to this system: At first it looks easy enough, $y(n)=x(n)(-1)^n$, set $x(n)=\delta(n)$, which makes $h(n)=(-1)^n$. But something seems wrong. What am I ...
0
votes
2answers
288 views

Block diagram for a complex impulse response

I have this question regarding digital systems which might not handle sinusoidal signals in general. So let us say that I have a system with impulse response $h(n) = \{1+j, -1, 2j \}$ with first ...
0
votes
1answer
601 views

How to find the impulse response of this system with complex roots?

I've been working trying to analyze a causal stable system. Hopefully a numeric example such as the one I am working on, and the problems I face during it could be useful to others. I have this ...
3
votes
2answers
4k views

Calculating the inverse filter for the (exponential) sine sweep Method

I am currently working on my Bachelor-Thesis about Real-Time convolution and Impulse Response Measurements. After reading different papers about the (exponential)sine sweep method I didn't find an ...

1 2
3
4 5
8