# Questions tagged [frequency-domain]

The tag has no usage guidance.

36 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
122 views

### $\tt ifft()$ function - absolute vs real form

I have multiple files from an experiment in frequency-domain that I would like to use ifft() function to convert to the time domain in R to apply signal processing ...
258 views

### Normalized cross-correlation in frequency domain

I never worked with signal processing and never really used Fourier transforms before, still I am working on a project consisting on taking the output of an accelerometer to detect some movement ...
134 views

### Is it right to talk about dynamic range on frequency domain?

I'm comparing three frequency response's plots from simulations and experiments and I observed that two of them look like clamped to a DC component, where the max dB value is i.e. 100 and the min is ...
61 views

### Break a signal into segments, add them together and then perform an FFT on the result

If you break a 4 second signal into 0.5 second segments, add them together and then perform an FFT on the resultant 0.5 second data. Will the FFT / frequency spectrum be the simlar to an FFT on the ...
424 views

### How to convert a spatial frequency in a 2D-DFT into the units radians per pixel?

Let's say I have a 2D image, and I take the discrete Fourier Transform (via FFT) of that image. In the frequency domain, I get the following image: In this image, let's just assume all the spatial ...
213 views

### How do I find amplitude modulation effects in natural signals

It is relatively easy to discover overlaid (additive) signals in natural phenomena using wavelet decomposition, Fourier Transforms, CEEMD, etc, because addition in the time domain is the same as ...
877 views

### Envelope detection in frequency domain with MATLAB

I need to compute the envelope of a spectrum in MATLAB. Is there a specific function that can do it? I saw the function [yupper,ylower] = envelope(x,np,'peak') ...
67 views

### Comparing the spatial frequency between groups of images

I have 2 groups of images, and I want to compare these groups based on the spatial frequencies of the images. In the end, I'd like to be able to say "group A is/is not significantly different from ...
101 views

### Creating synthetic frequency domain box filter vs 4 pixels in corners

Creating two 10x10 black images. 1st image, adding a 2x2 white box in the middle (Low pass filter). 2nd image, adding 1 pixel in each of the corners. Then performing the following steps in that order:...
294 views

### Why does my overlap-add integrator in frequency domain result in distorted signals?

With help from the dsp guide and DSP-Related, I tried to implement a leaky integrator in octave/matlab. It seems to work in general, but there are a few problems. So that's what I do: Calculate the ...
92 views

### question about the frequency of Gabor filters

The Fourier transform of 2D Gabor filters is shown below: F is the radial frequency of the Gabor functions. Another parameter Fm is denoted as highest central frequency. Fr is the constant frequency ...
721 views

### Adding shot noise in frequency domain

I have a current signal represented by an array in python, which I would like to add shot noise to. Shot noise is defined as $$σ_i = \sqrt{2qI \Delta f}$$ where $q$ is the elementary charge, $I$ ...
105 views

### How to optimize a wavelet transform?

I am using complex morlet wavelet to estimate frequencies and damping ratios in a 1-D signal. I have done it so far, and the results are accurate enough. Now my question is how can I modify or ...
822 views

### adaptive filter does not converge for all inputs

I am trying to make a frequency domain adaptive filter in matlab. It uses matlab adaptfilt.fdaf to create the filter parameters like step size and initializing initial filter weight values. Then I ...
88 views

### Keep the exact frequency content - Multidimensional fft

In Matlab I've got to generate a Gaussian process embodying a certain frequency content. Not to go multidimensional, I have used reshape function. I explain better ...
37 views

### Yet another fft question - a vocoder

Lets assume a pipeline X: ...
9 views

### Is the Channel Equalization corrects Carrier Frequency Offset (CFO) in signal?

As we know channel equalization is used for restoring the distortion ocured in signal. Hence, can we say the Carrier Frequency Offset (CFO) is being corrected and restored the actual signal.
16 views

### Generating a phase modulation frequency spectrum with jitter

I would like to produce a frequency spectrum plot like this: (from All About Circuits) I know that one can take the modulation frequency and multiply it by a given order and scale by the modulation ...
12 views

### How to match resolution of two or more signals

I have received the following 4 time-series signals and wanted to do some data analytics using these. Although the sampling is the same for all of these signals, 2 samples per second, problem is that ...
13 views

### Analysis of linear acceleration and angular velocity, how to?

Excuse me If you don't feel that this question is good enough, but at the moment this is my level of entry knowledge. Imagine that you have 200 recordings from the sensors, and information that you ...
58 views

### Encoder: Quantization in Frequency Domain

The article, "Let’s build an MP3-decoder!" describes quantization noise in the time domain: [masking] This property is very useful: not only can the nearby masked signals be removed; the audible ...
54 views

### LP to BP transformation steps

Considering the following problem, What i know to convert from LP signal to BP signal is to: Draw the FD of the LP equation From it I can draw the FD for BP From this graph I can deduce the equation ...
15 views

### Is there a criterion that says at what point you can distinguish 2 partially overlapping Lorentzian peaks?

If you have 2 Lorentzian peaks that partially overlap and you have some frequency resolution df (your points in frequency space are separated by df) and both Lorentzian peaks have FWHM $\Gamma$ is ...
67 views

### Plot Background Noise

I am a total newbie in signal processing. I have been trying to plot on simulink a time/frequency domain noise in PLC (Powerline Communication) that matches a real-world research "...
16 views

### What is the best spline to interpolate freq analiser graph

the question is as it is in the topic: What is the best spline to interpolate freq analiser graph? I am looking something simply and fast to implement. I read about catmull-rom it looks it could be ...
440 views

### When listening in to an AM signals of various frequencies, how do we exactly tune in?

Alright, so I read on AM and Double Sideband AM, but I don't the more fundamental idea - the frequencies. Frequency is just: $\frac{1}{T}$, where T is period So difference between 5 Hz and 30 Hz ...
577 views

### frequency domain zero padding in OFDM

I have a matlab code for OFDM system, in this code the auther added a zero padded subcarriers before the IFFT stage, in the middle of the raws, and added zero padded guard interval after IFFT, my ...
1k views

### Operations applied to functions in time domain and frequency domain

I am trying to make a succinct summary of how algebraic operations in the time domain translate in the frequency domain (via the use of Fourrier/Laplace transforms). Here is what I have derived so far:...
61 views

### Frequency Domain Equalization [Sources request]

When I read papers, I often see the term "Frequency Domain Equalizer". I do not understand what a "frequency domain equalizer" is. Do they mean equalizers like MMSE, LMMSE? Or is there an equalizer ...
151 views

### Poles and zeros from FRF

How can I determine the poles and zeros of a system given its frequency Response? I can understand how one can find the Frequency response from poles and zeros of a system. Is it possible to do it ...
217 views

### Determining Valid DTFT's

Are the following frequency domain signals valid DTFT's (Discrete Time Fourier Transforms)? Answer yes or no, and justify your answer. a) $X(\omega) = \omega + \pi$ b) $X(\omega) = i + \pi$ c) \$X(\...
367 views

### FFT frequency domain averaging and zero padding

I'm trying to get the average frequency response of an entire piece of audio by splitting it into segments, doing an FFT on each one, and averaging the magnitudes together. Its working great until I ...
388 views

### FFT of irregular shaped data

I have an irregular shaped 3D image that I want to do frequency domain filtering on. Currently I simply zero-pad the data to make it a cube, then do an fft. I was wondering if this was a valid ...
271 views

### Alignment of signals for ensemble averaging? Something else?

I have been applying ensemble averaging (adding signals of different trials to obtain one signal) to improve Signal to noise ratio in my data. I have achieved good results in terms of classification ...