The Stack Overflow podcast is back! Listen to an interview with our new CEO.

Questions tagged [aliasing]

In signal processing and related disciplines, aliasing refers to an effect that causes different signals to become indistinguishable (or aliases of one another) when sampled.

20 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
74 views

Apply timeshift to undersampled signal after bandpass after sampling?

I have sampled my continuous signal $x(t)$ at $x[n]=x(n/f_{\rm samp})$. The signal is undersampled, and I know I will not be able to recover my original signal anymore. After sampling a bandpass is ...
44 views

Aliased Signal's Frequency

So I have an incoming signal of 137.9 MHz and a sampling frequency of 1.4 MHz. Once sampled how do I calculate the aliased ...
75 views

Aliasing from downsampling and Nyquist

In a book Conceptual Wavelets in Digital Signal Processing by Lee Fugal 2009 on page 246 the author talks about aliasing present in DWT subbands due to downsampling by 2 and states: Recall from DSP ...
151 views

Decimation Aliasing

Lets say you have a signal which is sampled at rate $f_s$ and the bandwidth after sampling is $B$. Now you want to decimate this signal with a new sample rate $f_{s, new}$ where $f_{s, new} < f_s$ ...
57 views

Band Limited Impulse Train - DC offset correction

I am trying to get band limited saw-tooth wave. I have found this paper: Alias-Free Digital Synthesis of Classic Analog Waveforms. I am prototyping this code in common LISP, here is snippet of what I ...
103 views

Can picking an inappropriate roll-off frequency for a digital filter just alias the roll-off value?

I believe a related question is asked here, but my question deals more with what filter is realized if one fails to consider design parameters relative to sampling rate. In designing an IIR filter we ...
123 views

How to Sample Smooth Random Walks of Instantaneous Frequency

I want to generate a random sequence for instantaneous frequency with as little aliasing as possible (i.e I expect to see as close to constant amplitude as possible, with only the frequency varying). ...
54 views

Every second sample noisy

I sampled a signal and unfortunately every second sample is very noisy. The noise is Gaussian and bandlimited exactly in the same bandwidth as my signal. Is there a way to improve the noise without ...
307 views

What's wrong with my minBLEP Hard Sync Sawtooth code?

I implemented a Sawtooth Oscillator which uses minBLEP - Eli Brandt's original paper The minBLEP approach works very well for a normal Sawtooth but I specifically want to implement Hard Sync and ...
319 views

Can sample aliasing of strictly white noise lead to random walk (drift) in the sampled signal?

Aliasing of tones higher than the Nyquist frequency, and where the tone may have some degree of nonlinear distortion can appear as low frequency 'drift' or even near static bias in the sampled signal. ...
9 views

Where should I set my anti-aliasing filter corner frequency for this signal?

I have a Fourier transform of an arbitrary digital signal. The transform has For 1024 frequency bins. The magnitude plot of the first 100 is below, with no surprises in the unplotted 924 bins. Now, ...
56 views

How to prevent distortion after down-sampling?

I am new to audio signal processing, but in one of my machine learning projects that I am working on, I need to down-sample my audio somewhere in the middle of my neural network. Therefore, I need a ...
37 views

Minimum sample frequency that allows reconstruction of information signal but VIOLATES Nyquist?

Say in the frequency spectrum, you have an information signal between (-100, 100) Hz, and a noise signal between (-700, -500) and between (500, 700) Hz. What is the minimum possible sample frequency ...
67 views

Sample-rate, filtering, digital-filtering and aliasing

I am strugling with a question that I hope someone can help me with. I am recording single molecule events which I detect is picoampere square deflections. I wish to use as gentle low-pass bessel ...
57 views

What does the frequency band mean when it comes to finding aliases?

The time signal which i'm trying to find the aliases for is: $$x:{\mathbb R}\rightarrow {\mathbb R}\\\ x(t)=\cos(50t) +2\cos(70t).$$ If the sample period is $T_s = \frac{\pi}{60}$ then according ...
126 views

Choosing a Sampling Rate and a Cutoff frequency

I have an assignment: You wish to generate a pure 1000 Hz tone digitally using a computer. How would you choose a sample rate that assures that you could generate the tone and use the same sample ...
58 views

Nyquist Theorem adding two same frequency near to Nyquist Frequency with phase shift

This is my first question on this platform. Sorry if I made mistakes. What happens if we add two or more same frequency signals near to Nyquist Frequency with phase shift and sample them? For ...
279 views

Accelerometer BMI160 changing bias

Goal: Obtain the 3-axis accelerations from the Bosch BMI160 IMU when measuring the accelerations of the bogie of a commercial train. The accelerometer used is installed in a PCB and used by an mbed ...
Suppose that $f(t): \mathbb{R} \to \mathbb{C}$ is a $T$-periodic signal, with highest frequency $f_h$. Now suppose that our sampling rate frequency is lower than $f_h$, and is not any multiples of \$1/...