30 views

### FFT/PSD/IFFT analysis on single axis piezoelectric accelerometer signals for curb impacts

I'm trying to denoise the signal by performing PSD analysis and followed by IFFT. Ultimately, I want to generate Force and Displacement plots from the denoised acceleration signal. Noisy Acceleration ...
44 views

### Time Series processing using fft

I have a set of real data (timestamp and value) with an unstable step between samples (5sec, 30sec etc.). The data is the % of fillage of a vehicle's tank through time. Due to the harsh volatility of ...
43 views

### Using DFT Rotation for Frequency Down-Mixing

Is it possible to perform Frequency Down-Mixing (sometimes referred to as Down-Conversion) by simply rotating the DFT sequence? If so what are the Advantages and Disadvantages of this method?
62 views

### How can I generate an ideal 2D low-pass filter in MATLAB?

I've been tasked with creating a 32 x 32 half-band low-pass image filter in MATLAB. My thinking is to generate the ideal filter mask in the frequency domain and compute the corresponding convolution ...
31 views

### filtering difference b/w freq and time domain

When you want to get the specific frequency (ex. around 1000Hz), you might take FFT, remain the frequency you want, and reduce the power of the other frequencies you do not. ex.) if fs=16khz and ...
66 views

### FFTW audio artifacts when modifying magnitudes in frequency domain

I'm currently working with FFT (FFTW3) that I'm using to apply treatments on audio files frequencies. The Forward/Backward test is passed, since I can get the exact same soundfile when processing ...
101 views

341 views

### Building a FIR filter from an arbitrary frequency-magnitude response curve (eg. Least Squares fitting) [duplicate]

I'm trying to create a FIR filter from a magnitude equation, where my starting equation provides the magnitude (amplitude) between 0 and 1 for any given frequency in Hz. I posted the magnitude ...
100 views

### Time domain to frequency domain conversion of audio signals to extract 1/3 octave frequencies

I am writing first time in this forum and I am not expert in programming and FFT. We have developed an android app (Noise Tracker) for noise measurement using smartphones. It displays noise levels in ...
Suppose I have a measured signal $M$ that has frequency components from 0 to 50 Hz. I plot the specturm of this signal using FFT and I observe its frequency content (power vs frequency). Then, I ...