Linked Questions

1
vote
2answers
96 views

Question about ideal filters

Following shows the discrete time Fourier transform of an ideal low pass filter with cutoff frequency $\omega_c$: $$H\left(e^{j\omega}\right) = \begin{cases} 1, & \text{if $|\omega| \le \omega_c$...
0
votes
1answer
55 views

Reducing one frequency in song

How would I take a song input and output the same song without certain frequency ranges? Based on my research so far, the song should be broken down into chucks, FFT it, reduce the target frequency ...
0
votes
1answer
117 views

How many things can they be done with a spectrogram?

I found some things that can be done with a spectrogram. filter frequencies by setting the bins to zero observe what frequencies make up the signal. observe the energy or amplitude of each frequency, ...
0
votes
0answers
113 views

Where to start in the design of my filter to remove 50 Hz

pick any 3 random files from this database, : https://physionet.org/pn3/ecgiddb/ They are subject to 50 Hz powerline interference. We wish to convert from time domain to frequency domain and remove ...
1
vote
1answer
43 views

Using DFT Rotation for Frequency Down-Mixing

Is it possible to perform Frequency Down-Mixing (sometimes referred to as Down-Conversion) by simply rotating the DFT sequence? If so what are the Advantages and Disadvantages of this method?
0
votes
2answers
54 views

Extracting different frequency bands (alpha, beta, gamma) from brain activity data

I am new to signal processing and despite googling about my question, I still couldn't find the solution. I have an Electrocorticography (ECoG) dataset. This consists of recording brain activity from ...
0
votes
0answers
88 views

How enhance amplitude of audio signal without distortion?

After FFT I've set to zero some frequencies and I'd like to enhance the amplitude in order to recover the leak. I'd like to do a normalization in order to avoid distortion. I've done in this way but ...
1
vote
2answers
88 views

Time domain to frequency domain conversion of audio signals to extract 1/3 octave frequencies

I am writing first time in this forum and I am not expert in programming and FFT. We have developed an android app (Noise Tracker) for noise measurement using smartphones. It displays noise levels in ...
0
votes
1answer
55 views

Advantages of the Rotation Translation Operation Before Doing FT Smoothing

I was reading a relatively old paper from the 1970s on smoothing by FT methods (chemistry applications), where the authors show that if we do rotation translation operation on the signal (y- values) ...
0
votes
3answers
53 views

Filtering using fourier series

Suppose I have a measured signal $M$ that has frequency components from 0 to 50 Hz. I plot the specturm of this signal using FFT and I observe its frequency content (power vs frequency). Then, I ...
0
votes
1answer
48 views

Downsampling - how many extra samples to include

I want to downsample a finite section of an equidistant time-series $$x_i, \qquad i=0\dots n-1$$ by doing an FFT and dropping the upper part of the spectrum. Since the FFT looks at $x_i$ as a cyclic ...
0
votes
0answers
61 views

FFTW audio artifacts when modifying magnitudes in frequency domain

I'm currently working with FFT (FFTW3) that I'm using to apply treatments on audio files frequencies. The Forward/Backward test is passed, since I can get the exact same soundfile when processing ...
0
votes
0answers
53 views

FIR Filter Magnitude Response

This is the shape of the bipolar amplitude function for a FIR filter with odd m: I have 2 questions : If i want to use this FIR as a low pass filter between 0 and $\frac{F_{c}}{2}$ , how can i set ...
1
vote
0answers
51 views

My X ray images have black background, which turn gray after low-pass filter. How to recover blackness?

I am applying a low-pass filter to X ray images, which changes the pixel distribution such that the background goes from black to gray. In the attached figure, this amounts to the mode increasing from ...
1
vote
2answers
50 views

Digital filtering based on frequency component amplitude… why not?

I've got a very general question. I've just implemented a filter working in frequency domain that simply cuts every frequency component whose modulus amplitude falls below a certain threshold value. ...

15 30 50 per page