0
$\begingroup$

I am trying to implementation Cfar algorithm to our radar signal processing algorithm. I obtained some output but I want to be sure that is right. Cfar algorithm's output below like, I'm interpreting these outputs like this, where it should just specify something at the detected distance and speed, there's just a gap in that range. is this true? if not how can i fix it? So detected object's range value is 4.88 meter and it's velocity value is 0.39 m/s.

this is range and velocity which is detected object

enter image description here

The outputs I get after applying the cfar algorithm.

I was confused that the object detected here came out as a space, frankly. enter image description here

enter image descriptionhgjhj here

[![[3]: https://i.sstatic.net/CvDd4.png] enter image descriptioaaaaan here

$\endgroup$
2
  • $\begingroup$ There's couple Cfar results at MathWorks File Exchange : se.mathworks.com/matlabcentral/fileexchange?q=Cfar I did not check these because of radar tehc is out of my knowledge. $\endgroup$
    – Juha P
    Commented Aug 23, 2023 at 7:10
  • $\begingroup$ Without code or a description of what kind of radar this is (FMCW, pulsed-Doppler, etc.) we can't help you further as this makes a big difference on how filtering is set up. $\endgroup$
    – Envidia
    Commented Aug 29, 2023 at 19:44

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.