0
$\begingroup$

I am a beginner who is learning about DVB-T. I noticed a difference in the examples provided by the official source and I am confused about it.

This is dvbt_tx_8k enter image description here

This is dvbt_rx_8k enter image description here

What is the principle behind doing it this way?Thanks a lot!

EDIT 1: Sorry, my previous description of the problem was not detailed enough. In my opinion, there should be a IFFT block before OFDM Cyclic Prefixes block in dvbt_tx_8k.grc, which corresponds to FFT block behind OFDM Symbol Acquisition block in dvbt_rx_8k.grc, in order to achieve correct demodulation. However, in fact, signal transmission can only be successful when there is no FFT block in dvbt_tx_8k.grc. Otherwise, errors will occur, which confuses me.

Both files(dvbt_tx_8k.grc and dvbt_rx_8k.grc) can be found at

/usr/share/gnuradio/examples/dtv

$\endgroup$
1
  • $\begingroup$ Please clarify your specific problem or provide additional details to highlight exactly what you need. As it's currently written, it's hard to tell exactly what you're asking. $\endgroup$
    – ZaellixA
    Mar 24 at 9:28

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Browse other questions tagged or ask your own question.