4
$\begingroup$

I know this is not a technical question, but wanted to get some opinion on how to get some hands-on experience on embedded DSP / real-time signal processing

I am comfortable with DSP and wireless communications simulations in MATLAB /python and wanted to get into embedded DSP development and I'm not able to get any structured way of learning real-time DSP (I regret not taking RTSP class in my masters) . I'm proficient in C and have a very basic level knowledge in assembly. I'm ok to buy the hardware for my learning curve.

I tried searching for any online training /course from universities which offers such class where we start writing some vector DSP code on the embedded platform (TI or ARM etc).

Any recommendations/insight into this would be highly grateful.

Thanks Saira

$\endgroup$
3
  • $\begingroup$ Hi! This is a bit open-ended, and you're really asking for an opinion. Sadly, that doesn't fit the site's methodology well (and hence isn't allowed by the rules). $\endgroup$ Dec 7 '20 at 17:27
  • $\begingroup$ I agree @MarcusMüller . I cant ake down the post if it really doesn't fit. $\endgroup$
    – Saira
    Dec 15 '20 at 23:06
  • $\begingroup$ Thanks @Fat32 .. I'm following a UT-Austin lab with their prescribed textbook .. I posted the links below $\endgroup$
    – Saira
    Dec 15 '20 at 23:07
1
$\begingroup$

I had taken the course at my university. So most of the materials were provided as part of it. I worked with 2 different DSPs both of which were provided at the lab.

If you are looking to buy hardware, Real-Time Digital Signal Processing by Sen M Kuo and Bob H Lee is a good book with implementation and architecture descriptions of TMS320C55x. It has around 9 interesting application-level implementations as well. But getting all the hardware necessary might be too much though.

$\endgroup$
4
  • 1
    $\begingroup$ went through the second edition online and it looks promising. I think the hardware they recommend in third edition is ezDSP . $\endgroup$
    – Saira
    Dec 15 '20 at 23:02
  • 1
    $\begingroup$ I found this RTSP course from UT-Austin which is really good and they use this textbook " Real-Time Digital Signal Processing from MATLAB to C with the TMS320C6x DSPs " and the UT instructor videos are on youtube.com/playlist?list=PLaJppqXMef2ZHIKM4vpwHIAWyRmw3TtSf $\endgroup$
    – Saira
    Dec 15 '20 at 23:05
  • 1
    $\begingroup$ Thanks @Aaquila $\endgroup$
    – Saira
    Dec 15 '20 at 23:05
  • $\begingroup$ @Saira Great, thanks for the update!! $\endgroup$
    – Aaquila
    Dec 19 '20 at 8:39

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.