0
$\begingroup$

I have generated 20 MHz bandwidth LTE waveform. I wanted to do carrier aggregation of this signal to get 100 MHz Signal.

I want to understand how carrier aggregation is done mathematically, so using built-in matlab functions isn't what I'm looking for.

$\endgroup$
  • 1
    $\begingroup$ sounds like a programming problem if you don't want to use what's there (without giving a reason) instead of a signal processing problem. That would be off-topic. But it could be on-topic if you explain why you need to implement this on your own. $\endgroup$ – Marcus Müller Dec 27 '18 at 9:34
  • $\begingroup$ I want to know how it could be done mathematically. $\endgroup$ – Hitman 47 Dec 27 '18 at 13:32
  • $\begingroup$ I've edited your question to reflect that. However, that is not done on the waveform of a single carrier. So I'm still not sure what you're asking for. You can't "aggregate" a single 20 MHz wide signal. $\endgroup$ – Marcus Müller Dec 27 '18 at 16:42
  • $\begingroup$ In LTE, the main benefit of Carrier Aggregation is to assemble fragmented frequency bands hence the aggregation is designed at protocol level. This means that each carrier is implemented as it has always be and the control channel (eg pdcch of pcell) will tell the receiver how to extract the data from secondary carriers. No math involves here except 5x20MHz = 100MHz to indicate how much bandwidth we are using. $\endgroup$ – AlexTP Dec 27 '18 at 16:58
  • $\begingroup$ example of CA using matlab LTE System Toolbox fr.mathworks.com/help/lte/examples/… $\endgroup$ – AlexTP Dec 27 '18 at 16:59

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.