-1
$\begingroup$

What I'll get if I take FFT of a frequency domain data.

I have two questions related to this.

  1. For ex, x is a time domain data where X = fft(x), now fft(X)= what i'll get ?

  2. While reading SCFDMA, data is first DFT'd and a subcarrier mapping happens then we are taking an IFFT which will transmitted using a radio. According to my knowledge the input to radio is a time domain data.But in SCFDMA taking DDT itself converts my time domain data to Frequency domain then again if i take IFFT the frequency domain data converted back to time domain which is fed to radio. How this works ?

$\endgroup$
  • 1
    $\begingroup$ One question per question please - this seems like it's two very different questions. $\endgroup$ – Paul R Oct 3 '13 at 9:40
  • $\begingroup$ Also, as pointed out in the answer, please be sure to define acronyms that you're using. Not everyone is familiar with the exact problem domain that you might be working in. $\endgroup$ – Jason R Oct 3 '13 at 15:13
  • 1
    $\begingroup$ SCFDMA most probably refers to single-carrier frequency division multiple access as beeing used in Long Term Evolution (LTE) uplink. DDT is a typo I guess and should be DFT. $\endgroup$ – Deve Oct 3 '13 at 16:54
6
$\begingroup$

The FFT of the FFT bascially gets you the original signal again, it's just scaled and time flipped, i.e. $$FFT\left \{ FFT \left \{ x(n) \right \} \right \} = N \cdot x(-n)$$

That's a simple consequence of the fact that the forward and inverse Fourier Transforms are almost the same.

I have no idea what all the acronyms in the second question mean.

$\endgroup$
  • $\begingroup$ I think SC-FDMA is single carrier-frequency domain multiple access. Or he actually means SC-OFDMA. $\endgroup$ – user304584 Mar 20 '17 at 14:05

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.