I've done research and could not find any resources on this topic.
I have message signal composed of more sinusoids. Then I preform amplitude modulation, that is multiply that signal with higher frequency carrier signal, and obtain modulated signal. Then to demodulate that signal, I multiply the signal with same carrier signal, and obtain demodulated version of signal. Then I should pass the signal through low pass filter, to obtain signal identical to message signal.
If I do this by matlab using fdesing.lowpass
it is fine I get good output, but how to do this low pass filter by hand on paper, if I just ignore frequencies higher than the maximum frequency in message signal I don't get same amplitudes.
I multiply signals by using inverse Euler formula for $\cos$.
Any link or help would be appreciated.
If I didn't make myself clear, let me now and I will try to write an example (which I omit for now because I don't see here any latex support for writing mathematical equations).