4
$\begingroup$

Does anybody know why we need 2 different tone signals: one high frequency and one low frequency to create a tone burst in Dual-Tone Multi Frequency signalling?

For example, to create a tone burst of 3, we need a high frequency $1477 \mathtt{Hz}$ and a low frequency $697 \mathtt{Hz}$. Does anyone know the reason for that?

$\endgroup$

1 Answer 1

7
$\begingroup$

Essentially, the reason why you need two tones is to ensure that a normal human voice can't replicate the tones. As such, by simultaneously generating a tone from a high-frequency group and low-frequency group, it is highly improbable that a human voice can replicate a sound from such differing ends of the frequency spectrum at the same time.

If we were to adopt single tone dialing, wouldn't it be annoying if you were to talk to someone, your voice matches one of the dialing frequencies and it would randomly dial that number while talking? It would certainly annoy me!

The Dual-Tone Multi Frequency tones (or DTMF for short) for a particular key is split up in the following grid:

1     |    2     |   3    |    A    |   697Hz
4     |    5     |   6    |    B    |   770Hz
7     |    8     |   9    |    C    |   852Hz
*     |    0     |   #    |    D    |   941Hz
--------------------------------------
1209Hz   1336Hz    1477Hz    1633Hz

For example, by pushing 1, you would generate two tones: 697 Hz and 1209 Hz from the low and high frequency ranges respectively. In your post, you have already identified the frequencies used when dialing the number 3. A,B,C,D are probably something you haven't seen before. A,B,C,D were actually used as keys for the US Military's Autovon phone system. They were used for:

  • A - Flash Override
  • B - Flash
  • C - Immediate
  • D - Priority

Pushing one of these keys gave your call priority with Flash Override being the highest. The Autovon system has been disbanded for a long time, but many non-telephone applications still use those keys today.

One question that you may ask is how they decided to come up with these frequencies? The frequencies were chosen to avoid harmonics - as in no frequency being a multiple of another. Also, the difference between any two frequencies doesn't equal any of the other frequencies and the sum of any two frequencies isn't equal to any of the frequencies too. The frequencies were generated within a +/- 1.5% tolerance of each other, the highest frequency must be as loud as the lowest frequency and as much as 4 dB louder. This level difference is referred to as a "twist".

$\endgroup$
0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.